The Breeze series is a complete range of panel meters with a full range of
input and output options. From very economic simple OEM models to remote
controlled EExd units for hazardous areas. Options with integral power supplies
are ideal for driving loop powered transmitters.
The fully programmable relays offer a high degree of flexibility. Analogue
outputs allow for transmission or re-transmission to a DCS.
Panel and wall mount options are available, both may be protected to IP65.
|
● = Standard ○ = Option |
Breeze 10 | Breeze 20 | Breeze 30 | Breeze 40 | |
| Mounting | Panel mounting | ● | ● | ● | |
| Wall mounting | ● | ||||
| ATEX Zone 1 | ○ | ||||
| Power | 230 VAC | ● | ● | ||
| 85 to 260 VAC | ● | ● | |||
| 24 VDC | ○ | ○ | ○ | ||
| 19 to 50 VDC or 16 to 35 VAC | ○ | ||||
| Inputs | 4 Button membrane keypad | ● | ● | ● | |
| 4 Button remote control | ○ | ||||
| 0 - 20 mA or 4 - 20 mA | ● | ● | ● | ● | |
| 0 - 5 V, 1 - 5 V, 0 - 10 V, or 2 - 20 V | ○ | ○ | ○ | ○ | |
| Pt100 | ○ | ○ | ○ | ○ | |
| Modbus | ○ | ○ | ○ | ○ | |
| Variable Noise Filter | ● | ● | ● | ● | |
| Display | 13mm Red LED (9mm if IP65 option) | ● | ● | ||
| 20mm Red LED | ● | ● | |||
| 20mm Green LED | ○ | ○ | |||
| Variable display brightness | ● | ● | ● | ||
| Outputs | 21v Transducer power supply | ● | |||
| 24v Transducer power supply | ● | ● | |||
| Relay rate 1A @ 230 VAC | up to 2 | up to 2 | up to 4 | up to 2 | |
| Relay OC type 30 mA/30 VDC/100 mW | up to 4 | ||||
| Two thresholds per relay | ● | ● | |||
| Current output 0 - 20 mA or 4 - 20 mA | ● | ||||
| Variable relay hysteresis | ● | ● | ● | ● | |
| Variable relay turn on time | ● | ● | ● | ● | |
| Variable relay turn off time | ● | ● | ● | ● | |
| Peak hold for display and relay outputs | ● | ● | ● | ||
| Audible alarm | ● | ||||
| Conversion | Linear | ● | ● | ● | ● |
| Square | ● | ● | ● | ● | |
| Square root | ● | ● | ● | ● | |
| 21 Point user defined linearisation | ● | ● | ● | ● | |
| Password protection | ● | ● | ● | ● | |